Главная Equipment for the production of toilet paper from a prepared basis Automatic line

Automatic line

Get an offer

automatic line for rewinding, cutting and packaging of toilet paper.

TECHNICAL SPECIFICATIONS

1. Automatic installation for winding the basis of toilet paper without punching and stamping block type.

Purpose: rewind basis of toilet paper from recycled paper, without perforations and embossing technology rolls (logs).

Specifications:

1.1 installation consists of two units:

1.1.1 Block foundations of a single-layer winding unit without perforation.

1.1.2 Block unwinding odnotamburny.

1.2 diameter tambour paper-based to 1200 mm;

1.3 Pnevmopodem basis for the installation;

1.4 weight per square meter basis rewindable 28-40 g / sq m, the destructive force of not less than 2.5 N in the longitudinal direction;

1.5 Turning off the set when a given diameter in the range 90 ... 150 mm;

1.6 Air pressure in the pneumatic system is not more than 6 kg / sq cm;

1.7 Automatic ejection of paper wrapped around the log after winding to the desired diameter;

1.8 The total capacity of 20 kW;

1.9 provides the ability to work rewinding the installation in unattended mode by setting the sticker labels and storage of logs.

1.10 The machine control with operator panel;

1.11 Width of base (size) to 2320 mm;

1.12 speed rewind paper 250-350m/min;

1.13 Winding without a hole;

1.14 A wide range of adjustments to the size of roll, winding density of paper;

1.15 Dry cutting and pasting the basis of the last layer;

1.16 Availability alert system emergency stop (open the paper);

1.17 Human-machine interface;

1.18 Automatic tension control of paper between the blocks in the process of winding;

1.19 Dokleechny block;

1.20 Automatic start winding unit;

1.21 Automatic bookmark basis without sleeves (sleeves);

1.22 inner diameter of the base paper - 76 mm;

1.23 refueling operation basis - about 1.5 min;

1.24 Two tambour shaft on each block unwinding.

1.25 Ability to follow installation stamping block.

2.Avtomaticheskaya system for rewinding the basis of toilet paper with perforations, and block-type lettering.

Purpose: rewind basis of toilet paper from recycled paper and pulp perforation and embossing rolls in the process (logs).

Specifications:

2.1 Installation consists of three units:

2.1.1 Block foundations of a single-layer winding with power of perforation.

2.1.2 Block simple stamping with embossing roller.

2.1.3 Block unwinding odnotamburny.

2.2 diameter tambour paper-based to 1200 mm;

2.3 Pnevmopodem basis for the installation;

2.4 weight per square meter basis rewindable 28-40 g / sq m, the destructive force of not less than 2.5 N in the longitudinal direction;

2.5 Turning off the set when a given diameter in the range 90 ... 150 mm;

2.6 Air pressure in the pneumatic system is not more than 6 kg / sq cm;

2.7 Automatic ejection of paper wrapped around the log after winding to the desired diameter;

2.8 The total capacity of 35 kW;

2.9 Provide the opportunity to work rewinding the installation in unattended mode by setting the sticker labels and storage of logs.

2.10 The machine control with operator panel;

2.11 Width of base (size) to 2320 mm;

2.12 speed rewind paper 250-350m/min;

2.13 Possibility of winding without a hole or pocket;

2.14 A wide range of adjustments to the size of roll, winding density of paper;

2.15 Dry cutting and pasting the basis of the last layer;

2.16 Automatic tab sleeves between the shafts;

2.17 Availability alert system emergency stop (open the paper, the end of sleeve);

2.18 Human-machine interface;

2.19 Automatic tension control of paper between the blocks in the process of winding;

2.20 Dokleechny block;

2.21 Automatic start winding unit;

2.22 Automatic tab on the basis of the sleeve (sleeve);

2.23 Automatic bookmark basis without sleeves (sleeves);

2.24 inner diameter of the base paper - 76 mm;

2.25 refueling operation basis - about 2.5-3m;

2.26 Two bobbin unwinding shaft on the block.

3.Transporter TL-1

Purpose:is designed to transmit the log from the wound winding machine to the next conveyor belt.

4.Transporter 2nH TL

Purpose:is designed to receive the wound and reset the log (pneumatic), log on to the installation label stickers.

Adapting to the installation label to label.

5.Avtomatichesky machine for banding (pasting a label) logs of toilet paper

Purpose:Auto sticker label on the roll of Technology (old) toilet

paper.

Description:

5.1.Stanok fully automated.

5.2 feed logs to "label" is carried by a conveyor from the rewinder. After the sticker labels, the log is added to the dokleyku dokleechnyh rollers and fed into the elevator drive.

5.3 Simultaneous work with several machine rewinding machines.

5.4 Control loop performance off the machine and includes an alarm on loss,

jam and end labels, but also signals the near completion of her.

5.5 device to compensate for the density of the label allows you to work with her in a wide range.

5.6 Non-stop dressing adhesive labels and simplified refueling reduces the time

machine downtime to a minimum, and thanks to the log drive rewinding

machines are working at this time.

5.7 Disabling rewinding machines for the full storage of logs and banding machine with full elevator drive to optimize the work of the line as a whole.

Remote setting of the machine on the diameter of the log pastedTo be completed

machine used parts companies known for their

quality and reliability - Camozzi, Motovario, Schneider Electric, Sew-Eurodrive, etc.

Overall machine is simple to operate and reliable in operation.

Specifications:

5.8 performance - up to 16 logs \ min.

5.9 duty cycle - about 6 seconds (for up to 8 logs / min)

5.10 pasted the log diameter of 80 to 150 mm

5.11 diameter reels with the label - up to 600 mm. (Position of the figure in the reel on top \ bottom

does not matter)

5.12 pasted the log length 1250-2600 mm

5.13 nominal voltage of 380V 50Hz

5.14 total electric power consumption 2.5 kW.

5.15 nominal pressure pneumatic 6 bar.

5.16 adhesive consumption - 20 liters / day (wallpaper)

Please note that the automatic machine for banding

(pasting a label) logs of toilet paper not only produced in the CIS market,

but also competes with the leading European manufacturers.

6.Avtomatichesky elevator two-way logs of toilet paper.

Purpose: build process rolls (logs) before installing the cutting and drying the adhesive.

Specifications:

6.1. Receive up to 143 pieces of logs,

6.2. Automatic smooth transition path of the log, depending on their number (the smaller the shorter the path of the log, and vice versa: the more logs, the longer path);

6.3. Pnevmosbros two logs simultaneously on the chain conveyor cutter;

6.4. The diameter of logs from 90 mm to 150 mm;

6.5. Adapting to the installation label to label.

7.Avtomatichesky elevator logs of toilet paper.

Purpose:is designed to process logs for the storage and drying

further processing. The device operates in conjunction with banding

machine (conveyor) and the facility for cutting logs to the consumer rolls.

Description:

7.1 The machine is fully automated.

7.2 Collects pasted logs (up to 100 pcs.) for temporary storage and drying.

7.3 Allows you to avoid waiting at a stop rewinding machine cutting machine and a more efficient use of the cutting machine, using it only as

accumulation of logs.

Specifications:

Receive logs from 50 to 100 pieces, depending on the diameter of the log

rated voltage - 380

diameter logs from 80 to 150 mm

8. Automatic machine for cutting logs orbital type of toilet paper.

Purpose: cutting process rolls (logs) to the consumer rolls and scraps of rejection.

Specifications:

8.1. The diameter of the log of technology from 90 to 130 mm is cut into two streams, up to 150 mm in a stream;

8.2. Length of consumer rolls from 80 to 250 mm;

8.3. Speed - up to 150 cuts per minute;

8.4. Automatic cutting edge custom log file (specified on the PU display);

8.5. Automatic rejection of waste;

8.6. Automatic mode sharpening a knife - the frequency and duration specified in the display of PU;

8.7. Automatic power supply sharpening the knife as it is wear and tear;

8.8. Ability to change the orbit with respect to the knife lodgements as a knife with PU wear;

8.9. Audible alarm when an emergency stop;

8.10. Stop cutting cycle in excess of the maximum diameter of the log;

8.11. Rated voltage - 380 V;

8.12. Power Consumption - 9 kW;

9.Avtomatichesky machine for cutting logs rocker toilet paper

Purpose:Automatic cutting logs of toilet paper rolls on the consumer.

Description:

9.1 The machine is fully automated.

9.2 Dvuhrucheykovaya supply of logs by the conveyor.

9.3 knife disc. Electromechanical supply a knife to cut. Automatic feeding logs

on the cut. Quality of cut is very high. Sharpening a knife automatic - diamond cup

without drive.

9.4 Automatic adjustable cutting edges and the length of the log rolls much

reduces the amount of waste.

9.5 Settings of the machine is on the control panel with the man-

machine interface.

9.6 Simultaneous work with several rewinding machines

9.7 The design of the machine ensures safe operation of the staff.

Specifications:

9.8 diameter of cut logs from 80 to 120 mm in two streams, or up to 150 mm in a creek

9.9 nominal voltage - 380

9.10 Power Consumption - 4.1 kW

9.11 length of consumer rolls from 80 to 250 mm

9.12 speed in the base set - 120 cuts per minute

9.13 possibility of regulating the speed of

9.14 estimated resource of 200 220tys knife. cuts

9.15 average yield of 450-500 thousand knife cuts

9.16 performance - 220 rolls per minute. two-stream or 110 rolls per minute.

in a creek

10. Set for packing of finished rolls.

Purpose:formation and delivery of consumer packaging rolls.

Specifications:

10.1. Automatic feed rolls on the packaging in an upright position, with two layers on two sides;

10.2. Packed in plastic bags ready;

10.3. Pack rolls diameter 90 ... 130 mm in 4ryada in two tiers on 32sht. (4h4h2), 40pcs. (4h5h2) 48sht. (4h6h2) or 56sht. (4h7h2) with a length up to 670mm Packaging;

10.4. Pack rolls diameter 150 mm to 130 ... 3ryada in two tiers of 18units. (3h3h2) 24sht. (3h4h2) or 30pcs. (3h5h2) with a length up to 670mm package.

11. Automatic machine for producing 3-layer cardboard sleeve (sleeve)

Purpose:This machine is designed for the manufacture of 3-ply cardboard sleeve with an automatic cutting to length.

Specifications:

Capacity - up to 10 m. / min.

cycle time intervals - 3 seconds

Number Crew - 1Characteristics of the finished sleeve

:

diameter - from 10 to 100 mm.

wall thickness - from 0,6 to 1,2 mm.

liner material - cardboard, "NM" TU U21.1-05509659-020-2001

density board - 150-220 g \ cbm

Clay - EMCOL KKB40

12. Automatic machine for the Prospect Island 5-ply cardboard sleeve (sleeve)

Purpose:This machine is designed for the production of 5-ply cardboard sleeve with an automatic cutting to length.

Specifications:

Capacity - up to 6 m. / min.

cycle time intervals - 3 seconds

Number Crew - 1Characteristics of the finished sleeve

diameter - up to 60 mm.

wall thickness - 1 to 2 mm.

liner material - cardboard, "NM" TU U21.1-05509659-020-2001

density board - 150-220 g \ cbm

Clay - EMCOL KKB40

Главная Equipment for the production of toilet paper from a prepared basis Automatic line

Our address

1

№2 Energetikov str., Belgorod, Russia

Tel: +7 (4722) 40-23-26, Tel./Fax:+7 (4722) 33-43-54, Mail:   This email address is being protected from spambots. You need JavaScript enabled to view it.